Operation - Sylvania SP337 Instruction Manual

OPERATION:

BT (Bluetooth) pairing:
First time use or re-pairing the unit to a new BT Device, pair as follows:
1. Press and hold the
the Blue LED will flash quickly.
Power on the external BT Device and enter to BT searching mode. Start pairing following the on
screen instructions from the external BT Device. After paired, the unit will sound a promt tone and
the Blue Indicator will stop blinking.
If pairing is complete you may now play music with your external BT Device.
4. During playback:
Press the Button on the top of unit to pause, press again to resume normal playback.
Press the or
Press the or
Press the
POWER /
press again to turn it on.
5. When finished listening, pressing and holding the
Press and hold the
pairing model when the bluetooth is connected.
Notes:
When the external BT Device searched the unit, our model number " SYLVANIA SP337 "
will appear on the display of external BT Device.
If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after pairing:
1. Power on the external BT Device and enter to BT mode as usual.
2. Power on the unit as previously instructed.The Blue indicator on the top of unit will
illuminate and blink.
3. Wait a few seconds until the unit is automatically paired to the external BT Device. The Blue
Indicator will stop blinking.
4. After pairing is complete you may now play music with your external BT Device.
Power button to turn on the unit, there will have a tone coming up and
Buttons repeatedly to adjust volume level as desired.
Buttons repeatedly to skip tracks.
LED ON/OFF Button to turn off the Decorative LED Lights;
Play/PAIR button to disconnect the Bluetooth connection and go into
Button to shut off the unit.
6