Water Level; Bucket Operation - GE APER70 Owner's Manual

Using the Dehumidifier
Removing Collected Water (Continued)
To Install Hose: Push in hose and gently pull to make
sure it is secure.
Push hose in
To Release Hose: Hold the grey ring while pulling to
remove.
2. Pull hose out

Water Level

is full, or when the bucket is removed or not replaced in the
proper position.

Bucket Operation

If removed the Dehumidifier will not work properly.
When the coil is defrosted, the compressor or fan will
automatically restart and dehumidifying will resume.
49-7766
NOTE:
flow.
dehumidifier will not run if the bucket is not in the proper
position.
Foam
7