Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sonance LS12T SUB
Summary of Contents for Sonance LS12T SUB
- Page 1 IN-GROUND SUBWOOFER I N S T R U C T I O N M A N U A L LS12T SUB | LS15T SUB...
- Page 2 (see Figure 1). If using multiple subwoofers, select locations that Sonamp DSP 2-750 Amplifier Power Planning are the same distance from the main listening area. Sonance recommends one SLS subwoofer installed after every 4-5 satellites The maximum number of satellites and subwoofers that can be in a chain.
- Page 3 NOTE: THE SUBWOOFER IS VERY HEAVY, ALWAYS TEAM LIFT. DO NOT HOLD BY SPEAKER WIRE OR PLASTIC STRAIN RELIEF. Sonance Landscape Series systems allow for speakers to be daisy chained together. In a typical system with one zone of audio, run a stereo or 4 conductor speaker wire from the amplifier to the closest 4.
- Page 4 Specifications Model: LS12T SUB Model: LS15T SUB Woofer: 12” (305mm) polypropylene cone with Woofer: 15” (381mm) polypropylene cone with a Santoprene rubber surround a Santoprene rubber surround 22Hz – 100Hz ±3dB 20Hz – 100Hz ±3dB Frequency Response: Frequency Response: 300W, 150W, 75W, (38W 70V),...
- Page 5 SPECIFICALLY EXCLUDED. No one is authorized to make or modify any warranties on behalf of Sonance. The warranty stated above is the sole and exclusive remedy and Sonance’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product.
Need help?
Do you have a question about the LS12T SUB and is the answer not in the manual?
Questions and answers