GE APSA13 Owner's Manual And Installation Instructions page 8

Care and Cleaning
Internal Water Tank
The Water Full indicator ("FL" on the control panel
display) illuminates when the internal water tank has
filled with condensed water
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
2. Place a shallow 1 quart or larger pan (not included)
below the lower drain located on the back (near the
bottom) of the air conditioner.
3. Remove the cap and the rubber plug and drain the
water tank.
4. Re-insert the drain plug and screw the cap snugly into
place.
5. Plug in or reconnect power.
Storage
If the unit is not being used for a long period of time:
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
How to Insert the Batteries in the Remote Control
1. Remove the battery cover by sliding it according to the
arrow direction.
2. Insert new batteries, making sure that the (+) and (–)
of battery are installed correctly.
3. Reattach the cover by sliding it back into position.
8
2. Drain the water from the water tank. (See "Internal
Water Tank section" above.)
3. Use the original packaging to repack the unit to avoid
a buildup of dust or dirt.
4. Store the air conditioner in a cool, dry location.
NOTES:
rechargeable batteries.
system is not going to be used for a long time.
standard (carbon-zinc) or rechargeable (ni-cad, ni-mh,
etc) batteries.
water plug Drain cap
49-5000439 Rev. 3