Citizen CT-S601IIS User Manual page 21

If no data is received within 15 seconds after each cut or print, the print position is
automatically slid N* dots to the right. The original print position is returned to at
the next slide timing.
* N is the MSW8-6 setting value.
CAUTION
 Before configuring the top margin suppression setting, first remove any partially cut paper
from the printer. Failure to do so can cause the cut paper to be torn off by the next print
operation, which can cause printer trouble.
 Note the following precautions when using text compression.
• Comp ressed text is mo re difficult to read than the origin al text.
• Horizontally compr essin g text also makes the print range smaller , so the numb er of
print lin es does not change. Pay close attentio n to the print range when using
narrow pap er.
• Do not use compr essed text when printin g a bar code. Doing so may make the bar
code unreadabl e.
 If the right margin is too narrow, this may result in some print characters being cut off. This
function is disabled under initial settings. To enable this function, use MSW8-6 to specify an
appropriate value for the maximum slide amount.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
— 17 —
V10 CONSUMIBLES S.L.