Pelgrim PWM121WIT Detailed Instructions page 26

Table of Contents

Advertisement

4
5
26
Spinning
To change the spinning rate, in steps
Each program has a preset spinning rate which can be changed by
pressing the (4) key. You may also choose to drain the water from
the drum without any spinning (DRAIN).
The last setting is "stop pump"(RH) – the laundry remains soaked
in water from the last rinse.
Use this option if you wish to prevent creasing of the laundry when
you know you do not have the time to take it from the washing
machine immediately after the washing program is completed.
Spinning rate is indicated in the display above the key.
Washing program completion (end) time
Set the time when you wish the washing program to end (e.g. 5
in the morning). The machine will calculate, given the selected
program, when the wash has to begin.
By pressing the (5) key, you can adjust the time in 30-minute steps
(up to 5 hours) and by 1-hour steps for periods longer than 1 hour.
Max. setting of the wash completion time is up to 1 day.
If nothing is pressed for 5 seconds, actual washing time will be
displayed.
To reset the program end time, press the (5) key again.
Press the (5) key to display the estimated program end time on
the display unit. (For example, if you choose a program that lasts
2:39 and press the (5) key, the time will "jump" to the first full
hour, which is 3:00 in our case. Time will be counted down to 2:39;
hence, the program will be launched after 21 minutes and it will be
completed in 3 hours).
The function is activated when the START/PAUSE key is pressed.
After completion of the washing program, "END" is displayed on
the display unit.
to interrupt or change the program completion time, press the
START/PAUSE key. Press the (5) key to select a new washing
completion time and confirm it by pressing the START/PAUSE
key.
to quickly cancel the setting of washing completion time,
press the (5) key and hold it for 3 seconds; then, press the
START/PAUSE key to resume the washing program.
In case of a power supply failure, press the START/PAUSE key
to resume.

Advertisement

Table of Contents
loading

Table of Contents