Summers M94 Operator's Manual

Mounted harrow rolling choppers rolling baskets

Hide thumbs Also See for M94:

Operator's manual (30 pages)

page of 32

/ 32
Bookmarks

Quick Links

Download this manual

MOUNTED HARROW

M94, M104, M105, M106 AND M108

ROLLING CHOPPERS

IMPORTANT

THE OPERATOR IS RESPONSIBLE FOR

ADJUSTING THE MACHINE SINCE MACHINE

DOES NOT COME "FIELD READY" FROM

FACTORY.

SUMMERS MANUFACTURING CO., INC.

DEVILS LAKE, NORTH DAKOTA 58301 ................................................... (701) 662-5391

Operator's

ROLLING BASKETS

WEB SITE: www.summersmfg.com

Manual

CAUTION

READ & UNDERSTAND OPERATOR'S MANUAL

BEFORE USING MACHINE.

Printed in USA

Need help?

Do you have a question about the M94 and is the answer not in the manual?

Questions and answers

Summary of Contents for Summers M94

Page 1 Operator’s Manual MOUNTED HARROW M94, M104, M105, M106 AND M108 ROLLING CHOPPERS ROLLING BASKETS IMPORTANT CAUTION THE OPERATOR IS RESPONSIBLE FOR ADJUSTING THE MACHINE SINCE MACHINE DOES NOT COME “FIELD READY” FROM READ & UNDERSTAND OPERATOR’S MANUAL FACTORY. BEFORE USING MACHINE.
Page 2 This express warranty is the sole warranty of Summers. There are no warranties, which extend beyond the warranty herein expressly set forth. The sales for products of Summers under any other warranty or guarantee express or implied is not authorized. This warranty voids all previous issues.
Page 3 D. Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part Number when ordering replacement parts from your Summers dealer. E. Summers Mfg. can not be responsible for implement frame damage due to draft or weight of Mounted Attachments.
Page 4 SECTION 1 - SAFETY SAFETY-ALERT SYMBOL This symbol is used to denote possible danger And care should be taken to prevent bodily Injury. This symbol means: ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Definition of each Signal Word used in conjunction with the Safety-Alert symbol. indicates an imminently hazardous situation which, if not avoided, will result in death or serious DANGER injury.
Page 5 SAFETY DECALS 1. KEEP SAFETY DECALS AND REFLECTORS CLEAN. 2. REPLACE missing or unreadable decals. New decals are available from your Summers dealer by stating correct part number (PN) located in lower right hand corner. 1. TRANSPORT LOCK DECAL (PN 8Z0075)
Page 6 SECTION 1 - SAFETY 3. WING DANGER DECAL (PN 8Z0344) 4. ELECTROCUTION DANGER DECAL (PN 8Z0346) 5. PINCH POINT DECAL (PN 8Z0087)
Page 7 SECTION 1 - SAFETY 6. AMBER REFLECTOR (PN 8Z0800) 7. RED-ORANGE REFLECTOR (PN 8Z0805) 8. RED REFLECTOR (PN 8Z0810)
Page 8 SECTION 1 - SAFETY GENERAL ASSEMBLY SAFETY PRACTICES YOU ARE RESPONSIBLE for the safe assembly ALWAYS INSPECT LIFTING CHAINS AND of the machine. SLINGS for damage or wear. DO NOT ALLOW CHILDREN or other unauthorized BE SURE LIFTING DEVICE IS RATED TO persons within the assembly area.
Page 9 DISK MOUNTED HARROW INSTALLATION GUIDE Disk brackets and Spacer Tubes for M94 through M108 Mounted Harrow See Pages 2.05 – 2.07 of Whole Goods Catalog for Sections Required Use one short disk bracket with sections supported by one mounting arm. Use two short disk brackets to mount a single harrow section across disk center.
Page 16 JD 510/512 DISK RIPPER WITH SUMMERS HARROWS SECTIONS WIDTH 8H2310 8HD5250 8H1600 8H1505 M104 M106 REQRD CNTR MNTNG DISK SPACER, WING SECT BRCKT 4” 2 - 8HD5381 2 - 8HD5387 5 Shank / 2: 8’ –– –– –– 4 - 8H2310 4 - 8H2310 12 1/2’...
Page 17                                         ...
Page 18                                         ...
Page 19                                         ...
Page 20 MOUNTING INSTRUCTIONS FOR SUMMERS Mounted Harrows on Cultivators, Chisel Plows and Disk Some tillage implements have close to 180 degrees of wing travel into transport position. Machines like this include short wing machines with low transport height and 5 section machines (outside wings only). This type of fold can cause interference problems with SMC Mounted Harrows.
Page 22 SECTION 1 MODEL 74 BASIC LAYOUT AND ASSEMBLY; Fig. 3. Attach side plates to carrier arms using two 1/2 x 3” bolts per arm Fig. 1 (use a heavy flat washer on each side). Mount in front, middle or Lay out all bars behind implements to determine approximate rear set of holes depending on desired clearance between front mounting locations on the frame.
Page 23 Fig. 6. Install 7/16 x 1-3/4” clevis pin in top hole and back-up clip in adjust- ing bar as shown. Back-up clip allows implement to be backed up without damage to harrow teeth if they do not clear the ground. Fig.
Page 24 Plow (over center fold with 12” shank spacing). Three 14’ sections are used with three model 74 carrier arms per section. Two spacer tubes for lateral positioning are recommended (order Summers PN 8H1502 for one spacer tube). An optional method is to use two 7’ sections in place of one 14’ section.
Page 25 High-Clearance Disk Mounting Bracket, (29”) Long (w/mounting plate & hardware) All of the above brackets are designed to be used with Summers M74, M94, M104 or M106 mounting arms. When mounting disk brackets directly on disk gangs which run at an angle, a short and a long bracket are used so harrow sections run square.
Page 26 SECTION 4 SPECIAL BRACKETS FOR JD235 DISKS Order mounting package PN 8H1580 for 19-26 ft. models Order mounting package PN 8H1582 for 27-31 ft. models The photo to the right shows a 30’-1” JD235 disk with a 3 bar M74 Mounted Harrow. See the figures and sizing chart below for harrow layout on all size models.
Page 27 JD235 DISK FRAME MOUNTING BRACKET SELECTION CHART Bracket 19-26 Ft. Models 27-31 Ft. Models Bracket Description Bracket Description Long Hi-Clearance Short Hi-Clearance Modified Short Univ. (See Fig. 3a) Long Universal Modified Short Univ. (See Fig. 4a) Long Univ. & Extension Tube Modified Short Univ.
Page 28 SECTION 5 PACKING LISTS PACKING LIST FOR ALL MODELS For 2 bar attachments, order 3 bar brackets and 2 bar hardware package (PN 8H0200 – One required per pair) PACKING LIST FOR PN 8H1590 Model 74 Model 74 JD1610 Chisel Plow Mounting Package 3 Bar 4 Bar Description...
Page 32 ® . . . Field Tested TOUGH! Tillage Cultivators/Harrows Rock Picker Mounted Attachments Land Rollers/Packers Sprayers 1-800-732-4347 • www.summersmfg.com...

This manual is also suitable for:

M104 M105 M106 M108