Setup - Acer XD1520i User Manual

Setup

Language: Set the language for the OSD.
Boot-up Source: Select the projector's boot-up source. Options are: Auto, VGA,
Video, HDMI, and Media.
Note: If set to Auto the last source used will be displayed.
Direct Power On: Choose On to activate Direct Power mode. The projector will
automatically power on when AC power is applied, without pressing the Power
button on the projector control panel or on the remote control.
Sleep Timer (Hours): Set the sleep timer duration. The sleep timer will start with or
without a video source. The projector will automatically shut off after the selected
time. Options are: Auto, Off, 0.5, 1, 3, 8, 12.
Note: If the Sleep Timer is set to"Auto" then the project will automatically power off after 15
minutes if no video source has been detected.
Reset: Reset all settings to the factory default, including computer sources and
video source settings. After choosing this option, a confirmation message appears
on the screen. Select Yes to confirm or No to cancel reset.
26 English
Setup
Language
Boot-up Source
Direct Power On
Sleep Timer (Hours)
Advanced
Reset
Select Exit
Reset
Reset?
No
English
Auto
Off
Enter
Yes