Connecting External Devices - Lenovo Skylight UX User Manual

S10-3 UserGuide V1.0_en.book Page 12 Friday, December 25, 2009 3:58 PM
Chapter 2. Learning the basics

Connecting external devices

Your computer has a wide range of built-in features and connection
capabilities.
Using memory cards (not supplied)
Your computer supports the following types of memory cards:
• Secure Digital (SD) card
• High Capacity Secure Digital (SDHC) card
• MultiMediaCard (MMC)
• Memory Stick (MS)
• Memory Stick PRO (MS PRO)
Notes:
• Insert ONLY one card in the slot at a time.
• This card reader does not support SDIO devices (e.g., SDIO
Bluetooth, etc.).
Inserting a memory card
1 Push the dummy card until you hear a click. Gently pull the dummy card
out of the memory card slot.
Note:The dummy card is used for preventing dust and small
particles from entering the inside of your computer when
the memory card slot is not in use. Retain the dummy card
for future use.
2 Slide the memory card in until it clicks into place.
Removing a memory card
1 Push the memory card until you hear a click.
2 Gently pull the memory card out of the memory card slot.
Note:Before removing the memory card, disable it via Windows
safely remove hardware and eject media utility to avoid
data corruption.
12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -