UK
Important safety instructions
1. To obtain full use of the freezer, we recommend reading this instruction manual.
2. It is the user's responsibility to operate the appliance in accordance with the instructions
given.
3. Contact your dealer immediately in case of any malfunctions.
4. Place the freezer in a dry and ventilated place.
5. Keep the freezer away from strongly heat-emitting sources and do not expose it to direct
sunlight.
6. Always keep in mind that all electrical devices are sources of potential danger.
7. Do not store inflammable material such as thinner, gasoline etc. in the cabinet.
8. We declare that no asbestos nor any CFC are used in the construction.
9. The oil in the compressor does not contain PCB.
Unpacking and installation
Carefully examine the freezer for shipping damage before discarding the packing material. If any
damage is found, contact the delivery carrier immediately and have his agent prepare an inspection
report for the purpose of registering a claim.
THIS IS YOUR RESPONSIBILITY.
Electrical connecting
The cooler operates on 230 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be observed. The
freezer plug and wall socket should then give correct earthing. If in doubt, contact your local
supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-Amp or 3-pin 15-
Amp plug. If a B.S. 1363 (13-Amp) fused plug is used, it should be fitted with a 13-Amp fuse.
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.
Start-up of the cabinet
Before use, we recommend that the freezer is cleaned, see the section on maintenance and cleaning.
Important !
If the freezer has been vertically placed during transport, please wait 2 hours before starting up the
cabinet.
5
Need help?
Do you have a question about the CF77 and is the answer not in the manual?