Markings On Tool - DeWalt D25712-XE Instruction Manual

WARNING: Use of this tool can generate and/or disburse dust, which may cause
serious and permanent respiratory or other injury. Always use AS/NZS standard
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
WARNING: ALWAYS use eye protection. All users and bystanders must wear eye
protection that conforms to AS/NZS1337.
WARNING: ALWAYS wear proper personal hearing protection that conforms to
AS/NZS1270 during use. Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
WARNING: We recommend the use of a residual current device with a residual
current rating of 30mA or less.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V .................... volts
Hz .................. hertz
min ................ minutes
.............. direct current
................ Class I Construction
...................... (grounded)
................. Class II Construction
...................... (double insulated)
.../min ........... per minute

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
A ...............amperes
W ..............watts
...........alternating current
...........alternating or direct current
n o ..............no load speed
.............earthing terminal
.............safety alert symbol
BPM ..........beats per minute
RPM ..........revolutions per minute
4
FIG. 1
CHISEL BIT ADJUSTMENT MODE
HAMMERDRILLING
MODE
CHISEL BIT ADJUSTMENT MODE
J
H
C
CHIPPING MODE
E
I
F
D
A
B
G
E