Create Titling Effects; Select Page To Work On; Select "In" Effect - Datavideo SE-200 Pro Instruction Manual

h. You can also make cursor-size blocks of color that are different than the solid
background color: simultaneously press "ALT" + SHIFT + the "
same key as " i " ). Once you have created a block of color, you can
change that color by pressing the " CHAR COLOR" key.
Note: Remember, as noted above, you can also create clear-color
characters (instead of clear-color blocks) on a solid color background.
4.2.1 Go from Edit Mode to Effects Mode.
After you create the title you want on a page, press the "SUB MODE" key. You
should again see the "Titler Mode" menu appear on your TV screen. Press
number "2" to enter Effects Sub-Mode. In Effects Sub-Mode you should see
information on your TV screen as follows:
Current page number

4.2.2 Select page to work on.

When you switch into Effects Sub-Mode, the page number will be the same
page you last edited. Change pages the same way as in Edit Sub-Mode: press
the "PAGE" key and then the number keys (01-99)to bring up that page. You can
also go to the next page (eg. from page 03 to page 04) by pressing the "NEXT" key.

4.2.3 Select "IN" effect.

On your TV screen, "[IN]" should be flashing. If it is not, press the "IN" key until it
flashes. When "[IN]" flashes, you are ready to determine how your title will
appear on screen:
a). To make title CUT IN: This effect is pre-set and should appear on your
screen below "[IN]". If another effect is listed, press the "ENTER" key to
select the "CUT IN" effect.
b). To make title SCROLL IN: Press the "SCROLL" key. The words "SCROLL" will
appear on screen.

4.2 CREATE TITLING EFFECTS

How text comes "IN"
How long text "waits"
How text goes "OUT"
[EFFECTS]
[IN]
* CUT IN
WAIT: 1 SECOND
[OUT]
* CUT OUT
10
" key ( the
P: 01