Gigabyte X570S AORUS PRO AX User Manual page 31

& SVM Mode
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Disabled)
& AMD Cool&Quiet function
Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to
Enabled
reduce heat output from your computer and its power consumption. (Default)
Disables this function.
Disabled
& PPC Adjustment
(Note 1)
Allows you to fix the PState of the CPU. (Default: PState 0)
& Global C-state Control
Allows you to determine whether to let the CPU enter C states. When enabled, the CPU core frequency
will be reduced during system halt state to decrease power consumption. (Default: Auto)
& Power Supply Idle Control
Enables or disables Package C6 State.
Typical Current Idle Disables this function.
Low Current Idle Enables this function.
Lets the BIOS automatically configure this setting. (Default)
Auto
& CCD Control
(Note 1)
Sets the number of CCDs to be used. (Default: Auto)
& Downcore Control
Allows you to select the number of CPU cores to enable (the number of CPU cores may vary by CPU).
(Default: Auto)
& SMT Mode
Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. (Default: Auto)
& CPPC
(Note 1)
Enables or disables the CPPC feature. (Default: Auto)
& CPPC Preferred Cores
Enables or disables the CPPC Preferred Cores feature. (Default: Auto)
& Active OC Tuner
(Note 2)
Enables or disables the Active OC Tuner feature. (Default: Disabled)
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disables this function. (Default)
Disabled
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& XMP High Frequency Support
Allows you to select the compatibility level for high-frequency memory. This item is configurable only when
Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2. (Default: Auto)
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& FCLK Frequency
Allows you to set the FCLK frequency. Options are: Auto (default), 667MHz~4000MHz.
& UCLK Mode
Allows you to specify the UCLK mode. (Default: Auto)
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
(Note 1)
(Note 1)
(Note 1)
(Note 2)
(Note 2)
- 31 -