Advertisement
II.VEHICLE OPERATION
FORWARD
III.BATTERY INSTALLATION
Requires 6 AA Alkaline Batteries (2AA for transmitter
and 4 AA for vehicle). Batteries included are for demon-
stration purposes only.
Vehicle
1. Use a screwdriver (not included) to unscrew the
power clip cover screw, open the battery cover as
shown.
2. Remove 3 "AA" batteries (included for Try-Me Lights
ONLY) and replace with 4 new "AA" alkaline batteries
(not included) with polarity (+/-) as shown inside the
battery compartment.
3. Replace the battery door.
Transmitter
1. Remove the battery cover as shown.
2. Install 2 AA alkaline batteries(not included) with polarity
(+/-) as shown inside the battery compartment.
3. Replace the battery door.
*
Your transmitter is equipped with a special automatic
ON battery-saving feature. Just turn your vehicle
ON. Then push either transmitter control to run and
control your vehicle.
IV.CONSUMER INFORMATION
Note to Adults: To ensure that the child's play is both
safe and fun, please review all operating instructions
and safety rules with your child.
Safety Tips
• NEVER drive your vehicle on streets! They're for real
cars!
• DO NOT pick up vehicle while in motion.
• Keep fingers, hair and loose clothing away from the
tires and the wheel hubs while the vehicle is switched
ON.
CAUTION: To prevent entanglement, keep hair away
X
from wheels.
• Adult supervision is recommended when this vehicle
is being operated.
• To avoid accidental operation, remove all batteries
when not in use. Always turn the vehicle OFF before
removing batteries.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids
that can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product
before being charged (if designed to be removable).
REVERSE
LEFT
• Rechargeable batteries are only to be charged under
adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery (ies) safely.
• Do not dispose of this product in a fire.
The batteries inside may explode or leak.
Battery Performance Note:
For best performance use regular or high-performance
alkaline batteries (where disposable batteries are called
for). If your vehicle is supplied with standard (carbon-zinc)
batteries for initial use and/or demonstration purposes, we
recommend replacing them with alkaline batteries when
necessary. Battery life may vary depending on battery
brand.
RIGHT
Advertisement
