Saving Stitch Settings - Brother 888-F52 Operation Manual

Pushing the thread tension dial toward the right makes the
thread tension tighter.

Saving stitch settings

If you wish to save specific settings for a stitch so that they can
be used later, press after changing the settings to save the
new settings with the selected stitch.
This feature can be used only with utility stitches.
To use a stitch length of 2.0 mm for the straight stitch
a Select a straight stitch.
b Set the stitch length to 2.0 mm.
c Press .
• To reset the selected stitch pattern back to its default
settings, press , and then press
Note
• The next time that the same straight stitch is
• Both of the stitch width (zigzag width) and stitch
.
selected, the stitch length is set to 2.0 mm.
length are saved, not just the setting that was
changed. With models equipped with the thread
tension keys, the setting for upper thread tension
is also saved, even if it was not changed. When
the same stitch pattern is selected, the last
settings saved are displayed even if the machine
was turned off. If the settings are changed again,
or if is pressed to reset the setting to its
default, the new settings are not saved unless
is pressed another time.
Even if is pressed, the settings for
programmed thread cutting and automatic
reverse/reinforcement stitching cannot be reset.
Basic operations B-41
Setting the Stitch
B