Using The Appliance; Understanding The Air Quality Light; Switching On - Philips AC6609 User Manual

5
Put the pre-filter back into the
appliance.
Note
• Make sure that the side with the two
clips is pointing towards you, and
that all hooks of the pre-filter are
properly attached to the purifier.
6
To reattach the side panel, mount
the panel onto the bottom of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2).
7
Repeat the above steps and
assemble the air purification filters
for the other side of the appliance.
EN
10
4 Using the
appliance
Understanding the air
quality light
Color of the air
quality light
Blue
Blue-violet
Red-purple
Red
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.

Switching on

1
Put the plug of the appliance into
the wall socket.
» The appliance beeps.
» All lights go on once and then
go out again.
Air quality
level
Good
Fair
Unhealthy
Very unhealthy