Mitsubishi Electric MSZ-FD VA Series Service Manual page 58

12-2. MUZ-FD50VA
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(8) Remove the screws of the cabinet.
(9) Remove the cabinet.
(10) Remove the screws of the back panel.
(11) Remove the back panel.
NOTE: Turn OFF power supply before disassembling.
Photo 1
Screw of the top panel
Screws
of the
back
panel
Photo 2
Screw of the top panel
Screws
of the
cabinet
Screw
of the
service
panel
Screw
of the
valve
cover
58
PHOTOS
Screws of the cabinet
Screws of
the back
panel
Screws
of the
cabinet