Table of Contents
Advertisement
Transportation, e.g. if moving house
Preparatory work
1.
2.
3.
4.
5.
Installing transportation protection devices
1.
2.
Before switching on the appliance:
²
– Remove the transportation protection devices! ~ Page 47
– To prevent unused detergent from flowing into the outlet
Turn off the tap.
Release the water pressure in the supply hose.
Maintenance – Filter in the water inlet hose ~ Page 36
Drain any residual detergent solution.
Maintenance – Drain pump blocked
Isolate the washing machine from the power supply.
Remove the hoses.
Remove covers and keep in a safe place.
If required, use a screwdriver.
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
bolts.
during the next wash: Pour 1 litre of water into dispenser II
and start the Drain programme.
55
Advertisement
Table of Contents
