Table of Contents
Advertisement
2-3-2 South Bridge Configuration
PCH Information
Name/Stepping Information
Displays the name and stepping information of the south bridge.
SB Chipset Configuration
PCH Compatibility RID
Enable/Disable PCH Compatibility RID support.
Options available: Enabled/Disabled. Default setting is Disabled.
USB WakeOnDev insertion
Enable/Disable USB Device WakeOn support.
Options available: Enabled/Disabled. Default setting is Disabled.
Restore on AC Power Loss
Defines the power state to resume to after a system shutdown that is due to an interruption in AC power.
When set to Last State, the system will return to the active power state prior to shutdown. When set to
Stay Off, the system remains off after power shutdown.
Options available: Last State/Stay Off/Power On. The default setting depends on the BMC setting.
SCU Devices
Enable/Disable Patsburg SCU device.
Options available: Enabled/Disabled. Default setting is Disabled.
Onboard SAS oprom
Enable/Disable onboard SAS option ROM.
Options available: Enabled/Disabled. Default setting is Enabled.
(Note)
When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.
BIOS Setup
(Note)
- 76 -
Advertisement
Table of Contents
