• Depending on size of video mount solutions, two (2) or more persons may be required for installation. • Please ensure all safety precautions are followed when working with heights. Video Wall Installation Manual – 6WX1H Page 3 Rev. 09/2019...
Page 4
Part D Square Nut with 6W X 1H Screw Part N Part N2 6W X 1H Mounting Hardware Kit Part H Shim Kit 6W X 1H (Assorted sizes) Part SK Video Wall Installation Manual – 6WX1H Page 4 Rev. 09/2019...
This is referred to as measurement A. Fig. 1C • Measure the total height of video display panel as shown on figure 1D. Distance: _________ This is referred to as measurement B. Fig. 1D Video Wall Installation Manual – 6WX1H Page 7 Rev. 09/2019...
Page 8
1E. VESA points of panel Distance: _________ Inward/Outward micro This is referred to as measurement C. adjustment screw rests on bottom rail Fig. 1E Video Wall Installation Manual – 6WX1H Page 8 Rev. 09/2019...
Nuts into each top and bottom rail as indicated below: Model Top Rail Bottom Rail 6W x 1H • The Square Nuts will be loose inside the rail for time being. Fig. 2A Fig. 2B Video Wall Installation Manual – 6WX1H Page 9 Rev. 09/2019...
Top Rail using a 6mm hex key (not supplied). See figure IMPORTANT Fig. 3B Fig. 3C Do not tighten the hex bolt on right side yet. Fig 3D Video Wall Installation Manual – 6WX1H Page 10 Rev. 09/2019...
Page 11
Side Rail. See figure 3J. • Once spacing and measurements are confirm, tighten all the hex bolts on right hand side of rails to the right Side Rail. Fig 3J Video Wall Installation Manual – 6WX1H Page 11 Rev. 09/2019...
Page 12
Middle Frame on left side. See figure 3L. Fig. 3L • Once spacing and measurements are confirmed, tighten all the hex bolts on right hand side of rails. Video Wall Installation Manual – 6WX1H Page 12 Rev. 09/2019...
Page 13
See figure 3V. Fig. 3V • Once spacing and measurements are confirm, tighten all the hex bolts on right hand side of rails to the right Side Rail. Video Wall Installation Manual – 6WX1H Page 13 Rev. 09/2019...
See figure 4B. For concrete or concrete block walls only • Depending on number of Wall Brackets (Part E) supplied, determine placement by evenly spacing them out Fig. 4B Video Wall Installation Manual – 6WX1H Page 14 Rev. 09/2019...
Page 15
Wall Bracket to wall surface. They can be easily removed using a pair of pliers or slotted screwdriver. Refer to diagrams 4E or 4F. 4F) Removal using slotted screw driver Video Wall Installation Manual – 6WX1H Page 15 Rev. 09/2019...
Page 16
Wall Brackets (Part E) as close to ideal placement shown in figure 4G. • Fasten the very top rail Wall Brackets to studs at the reference points marked. Video Wall Installation Manual – 6WX1H Page 16 Rev. 09/2019...
Only hand tighten Screws into Square Nuts for each Wall Bracket at this time. • Repeat above steps and attached remaining Wall Brackets as indicated in figure 5E. Fig. 5E Video Wall Installation Manual – 6WX1H Page 17 Rev. 09/2019...
Bracket once Once the frame structure is straight, frame is straight plum and level tighten each Bolt to horizontally and secure and lock frame the frame in vertically position. Fig. 6B Video Wall Installation Manual – 6WX1H Page 18 Rev. 09/2019...
• Once monitors are mounted to rail, they can be moved sideways by simply sliding them on the rail. • Repeat for all remaining monitors to be mounted. Fig. 7E Video Wall Installation Manual – 6WX1H Page 19 Rev. 09/2019...
Turn the top screw clockwise to slowly raise the end of monitor. See figure 8C. • Turn the top screw counter clockwise to lower the end of monitor. See figure Fig. 8D Video Wall Installation Manual – 6WX1H Page 20 Rev. 09/2019...
Page 21
In the event monitors do not mount correctly on frame, the most common cause is result of frame not mounted level and plumb. If you still need assistance with the installation, we are a phone call away at (905)-828-1662. Video Wall Installation Manual – 6WX1H Page 21 Rev. 09/2019...
See figure 10A. VERY IMPORTANT: The Kick Stand (Part KS) must be placed behind all monitors that are directly above a monitor you require access to. Fig. 10A Video Wall Installation Manual – 6WX1H Page 22 Rev. 09/2019...
Canada by Micron or by an authorized Micron dealer, and Product was not sold “as is” or “sales final” that the Product will be free from defects in material and workmanship for a period of three (3) years and will within the warranty period, either repair the defective Product or provide the purchaser a replacement of the defective Product.
Need help?
Do you have a question about the 6WX1H and is the answer not in the manual?
Questions and answers