Subscribe to Our Youtube Channel
Related Manuals for SHOWTEC MPD-416CEE
Summary of Contents for SHOWTEC MPD-416CEE
- Page 1 MANUAL ENGLISH MPD-416CEE Power Splitter Ordercode: 91201 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
MPD-416CEE Power Splitter Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Connection with the Three Phase Power Network ....................4 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Frontside..................................6 Installation ................................... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec MPD-416CEE Power Splitter with a power cable (2 m) User manual... - Page 4 If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
MPD-416CEE Power Splitter Operating Determinations This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The maximum ambient temperature t = 35°C must never be exceeded. -
Page 6: Return Procedure
MPD-416CEE Power Splitter Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 7: Description Of The Device
This circuit breaker will cut off the power supply if the load current per phase exceeds 16A. 05) CEE power input Connect to the three phase mains. Make sure that the total load connected to the MPD-416CEE Power Splitter does not exceed 16A per phase. The CEE input should be connected to the power source which is equipped with its own RCCB protection. -
Page 8: Installation
MPD-416CEE Power Splitter Installation Remove all packing materials from the MPD-416CEE Power Splitter. Check if all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. -
Page 9: Product Specification
MPD-416CEE Power Splitter Product Specification Model: Showtec MPD-416CEE Power Splitter Max. power input: Dimensions: 435 x 125 x 137 mm (LxWxH) Weight: 4,1 kg Operation Input: 1 x 2-meter 5G6 cable, 32A 5-pin CEE 400V AC, 50/60Hz Output: 4 x 16A 240V Schuko output & 1 x 5-pin CEE 16A 400V... -
Page 10: Notes
MPD-416CEE Power Splitter Notes Ordercode: 91201... - Page 11 MPD-416CEE Power Splitter Ordercode: 91201...
- Page 12 ©2016 Showtec...
Need help?
Do you have a question about the MPD-416CEE and is the answer not in the manual?
Questions and answers