Opzoon OFR-T1-M Manual

Outlook
RJ45
DC12V
socket
IO
interface
UART
Microphone
Power switch
Front cover fixing screws
DC12V socket
IO interface
Opzoon Technology Co.,Ltd.All rights reserved.400-706-8366
Manual
Installation Guide
Rear
Front cover
cover
1. According to the rear cover size and fixed hole position, the
rectangular groove and 4 fixed holes (diameter 8mm depth 45mm) are
opened in the installation position in connection with the actual
Negative power
situation.
Positive power
2. Remove the front cover fixing screws and slide the front cover
R_OFF
upward. Secure the device to the backplane with 4 sets of screws (M4
R_COM
R_ON
* 14) and nuts (M4 * 7 * 3.2), then replace the front cover and secure
GND
the screws.
W_OD1
W_OD0
3. Connect the cable to the device.
GND
4. Secure the device to the wall with four sets of expansion bolts (M4
W_ID1
* 40) through the back panel, then affix the trim.
W_ID0
global.surport@opzoon.com www.opzoon.com
Install the fixing hole
Decorative
articles
doors backplane
Decorative articles
Product Specification
Product model
OFR-T1-M
Facial anti-counterfeit Support
Recognition distance 60 ~ 90 cm
Recognition mode 1 : N , 1 : 1 , 1:1 / 1:N
Ambient light range 0 ~ 800LUX(Camera lens should be avoided from the
direct sunlight)
Processor 2.1GHz quad-cord CPU plus 192-cord GPU
Memory 2GB DDR3 RAM
Flash 16GB（scalable）
Camera
Dedicated binocular camera (visiable light and near-infarad lens)
Display 8.0" IPS LCD touch screen
Ambient temperature 0℃ ~ 45℃
Power 12V 4.16A Max
Dimenstion 123 x 165.71 x 320.61 mm (L x W x H)
WIFI Support
Bluetooth Support
Wiegand input 1，W_ID0/W_ID1/GND
Wiegand output 1，W_OD0/W_OD1/GND
Relay 1，R_ON/R_COM/R_OFF
Netword port 1
UART 1
USB 2
OTG 1
Debug 1
DC 1