Related Manuals for JAR Systems ELEVATE MC-6 Series
Summary of Contents for JAR Systems ELEVATE MC-6 Series
- Page 1 USB-C Charging Cart USB-C HYBRID MC-6XXX Assembly and User Manual Version B For a copy of the most up-to-date manual, please contact a JAR Systems representative or visit: JAR-Systems.com/Support...
- Page 2 (C3) Cart Assembly Instructions (A1) x12 Components Bottom Panel Right Side Panel Left Side Panel Quick-Sense USB-C Hub (C3) x4 (optional) Power strip for hybrid cart only. Hub/Tray Lid Hub/Tray Shelf Top Panel Top Panel (A1) x12 Corner Bumper (A1) (A1) (C3) x4 Back Center...
- Page 3 6: Locate the holes on each corner of the top panel for the gray rubber bumpers. With the included drill tap bit 7: Using the 8mm wrench (E5), hand tighten 2 nuts (C3) (E5), drill through the holes to ensure the screw goes in securely. Place a bumper to each corner of the cart’s on both sides of the top panel inside of the cart.
- Page 4 Cart Assembly Instructions (D4) x6 (A1) x4 (D4) x8 Plug in the Power Cords (D4) x8 Plug in the 11: Connect the USB-C Quick-Sense hubs’ power cords 13: Attach both of the back panels to the cart using 8 12: Hybrid Carts Only: If installing the AC adapter cables Power Cords into the back of the hub and the 4-outlet power supply short screws with 8 plastic washers (D4).
-
Page 5: Using The Cart
USB-C Emulator Cables Included, contact JAR Systems for more info) Installing Device Bay Dividers Elevate carts feature adjustable device bays with multiple configuration options. This means that not every slot in the tray will have a divider in it and there may be extra, unused dividers at the end of the assembly process depending on which hole pattern is used. - Page 6 Installing Charging Cables and Adapters (For Hybrid Carts Only) 1: Remove the security screw using the provided Torx key (E5) from the center of the shelf and temporarily 2: Determine the length of cable that is needed to reach place it in the side of the cart to hold the tray open during the wiring process.
- Page 7 In this case it may be best to arrange the majority of the adapters as far back in the tray as possible from left to right, flipping about half of them on their side. Please contact JAR Systems for additional assistance. EXAMPLE...
-
Page 8: Warranty
To the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by JAR Systems is limited to the cost of repairing or replacing the failed product or component at the...