Coby DVD968 Instruction Manual page 14

DVD968 at a Glance
Name
1 Standby
2 Numeric
Keypad
3 GOTO
4 SETUP
5 AUDIO OUTPUT
MODE
6 PROG
7 VOL+
VOL–
8 FORWARD
SEARCH +
REVERSE
SEARCH –
9 TITLE
AM/FM
10 Navigation
Keypad
11 AUDIO
MEMORY
12 S.EFFECT
13 STEP
Page 14
Turn the unit on or off (standby). The Main Power switch on the rear
panel must be set to the ON position.
<0-9, 10>: Use the numeric keypad to input numbers where appropri-
ate.
<+10>: Add 10 to input numbers higher than 10. For example, press
<+10> twice and then press <5> to input the number "25".
Enter Direct Access mode to go to a specific part of a movie.
Enter the main setup menu of the unit.
Press to switch the audio mode between 5.1-CHANNEL OUTPUT and
STEREO OUTPUT.
Enter Program mode to create a custom playlist.
Increase the volume level.
Decrease the volume level.
Video & Music] Increase the rate of forward playback (fast-forward).
[Radio] Tune to a higher station frequency.
[Video & Music] Increase the rate of reverse playback (rewind).
[Radio] Tune to a lower station frequency.
[DVD] Enter the DVD Title menu.
Radio: Change between the AM and FM bands.
<Arrow Keys>: Navigate on-screen menus.
[DVD] Change the DVD audio channel (requires a DVD featuring mul-
tiple audio channels).
[Radio] Manually save the current frequency as a preset station.
Change the sound effect options.
[DVD} Play DVD video frame by frame.
Description
Coby Electronics Corporation