Samsung UA60J6200AW E-Manual page 119

Using Anynet+ (HDMI-CEC)
Viewing Anynet+ (HDMI-CEC)-compliant devices
After connecting external devices to the TV, select
for Devices. The TV displays a list of Anynet+ (HDMI-CEC)-compliant devices that you can set up
as Anynet+ (HDMI-CEC)-enabled devices (i.e., devices that can be controlled with the TV's remote
control). To set up an Anynet+ (HDMI-CEC)-compliant device as an Anynet+ (HDMI-CEC)-enabled
device, you must select it on the Source screen. Follow the instructions in the next section.
Setting up as an Anynet+ (HDMI-CEC)-enabled device
1.
SOURCE
Press the
down directional button.
2.
Anynet+ (HDMI-CEC)
Select
(HDMI-CEC)-enabled device. The following menu options are available.
"
The menu options available in the pop-up menu may differ with the external device.
Anynet+ (HDMI-CEC)
●
Sets up the selected device as an Anynet+ (HDMI-CEC)-enabled device and then displays a list
of Anynet+ (HDMI-CEC)-compliant devices connected to the TV. Select
(HDMI-CEC), and start watching TV.
button on the remote control. On the
Tools
from the
MENU System
Source
list. The selected device is set up as an Anynet+
Anynet+ (HDMI-CEC)
screen, select the device and the
View TV
to exit Anynet+
Search