Chapter 2 – Operation
Default Operational Settings
The OG-3G-AMD ships from the factory with the following configuration:
• Local (DIP switch) control.
• Input AES audio channel pairs 1/2, 3/4, 5/6, 7/8 are embedded to SDI output
channel pairs 1/2, 3/4, 5/6, 7/8, overwriting any existing embedded audio.
• Input SDI embedded audio channel pairs 1/2, 3/4, 5/6, 7/8 are disembedded to
AES audio output channels 1/2, 3/4, 5/6, 7/8.
• All HANC packets pass from SDI input to output, except for embedded output
audio channels 1/2, 3/4, 5/6, 7/8.
If these settings apply to your requirements, you can simply connect the video
and audio input and output signal cables and power up the unit.
For other applications, you can configure the card using its DIP switch settings, or
using the DashBoard Control System.
DIP Switches
The OG-3G-AMD DIP switches configure the audio embedding and
disembedding functions, and control ancillary data.
Figure 10. OG-3G-AMD DIP Switches
DIP Switch Settings
DIP switch settings can be used to configure the functions of the OG-3G-AMD
card. Please see the following
page 12
Table 1. OG-3G-AMD DIP Switch Setting Descriptions
SWITCH FUNCTION
1
Control
2
Audio
Embedding for
Channels 1/2
(EMBD 1/2)
OG-3G-AMD openGear Card v1.0.4
"OG-3G-AMD DIP Switch Setting Descriptions" on
for detailed descriptions of the DIP switch settings.
DIP Set LEFT (default)
Selects Local (DIP), and blocks DashBoard
control.
(ON) Overwrite or embed new channel 1/2
packets.
DIP Set RIGHT
Selects Remote (DashBoard), and disables
DIP switches 2-8.
(OFF) If AUX (SW 8) is ON: Pass any channel
1/2 packets from input SDI.
If AUX (SW 8) is OFF: Delete all packets
from input SDI.
12
www.aja.com