Advertisement
5.
Release the webcam/microphone module (1) from the display enclosure as far as the webcam/
microphone module cable allows.
6.
Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
7.
Remove the webcam/microphone module.
Reverse this procedure to install the webcam/microphone module.
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel and bracket.
Description
Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the optical drive:
1.
Position the computer with the front toward you.
2.
Remove the Phillips PM2.5×5.0 screw (1) that secures the optical drive to the computer.
54
Chapter 4 Removal and replacement procedures
Battery on page
51).
Spare part number
480461-001
480459-001
480458-001
Advertisement
