Planex DWR-510 User Manual page 20

User Manual DWR-510
ii. ii. ii. ii. Router mode Router mode Router mode Router mode
Please push slide switch to "Router" position to configure device to "Router mode". Device will
enable WWAN and WiFi router function in "Router mode". Steps to use device in "Router mode":
1. Push slide switch of device to "Router" position.
2. Enable WiFi function in your computer.
3. Turn on WiFi management tool in your computer, the default SSID of DWR-510 is
DWR-510-dlnk. Please connect to it and you can start to surf the network.
4. Webpage for "Router mode" management
4.1 IP address to access management webpage
The default IP address is
4.2 SETUP
4.2.1 INTERNET
It's used to setup APN for 3G router.
http://192.168.0.1/
- 20 -
V0.1 (Draft)