Safety Information Contents Safety Information ..........39 CAUTION Markings on the Product........40 RISK OF ELECTRIC SHOCK Environmental Information........41 DO NOT OPEN Features ..............41 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO Accessories Included..........41 NOT REMOVE COVER (OR BACK). Standby Notifications ..........
• Do not place any heat sources such as electric WARNING heaters, radiators, etc. near the TV set. • Do not place the TV on the floor and inclined Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the surfaces.
• Teletext WALL MOUNTING WARNINGS • Headphone connection • Read the instructions before mounting your TV • Automatic programming system on the wall. • Manual tuning • The wall mount kit is optional. You can obtain from • Automatic power down after up to eight hours. your local dealer, if not supplied with your TV.
To change channel: Press the middle of the button Inserting the Batteries into the Remote in, the information banner will appear on the screen. Remove the screw that secure the battery compartment Scroll through the stored channels by pushing the cover on the back side of the remote control first.
Notification Specification TRADEMARK ACKNOWLEDGMENT TV Broadcasting PAL B/G D/K K I/I’ The terms HDMI and High-Definition Multimedia VHF (BAND I/III) - UHF Interface, and the HDMI Logo are trademarks or Receiving Channels (BAND U) - HYPERBAND registered trademarks of HDMI Licensing Administrator, Fully integrated digital inc.
Standby: Switches On / Off the TV Remote Control Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. TV: Displays channel list / Switches to TV Source Mute: Completely turns off the volume of the TV Volume +/- Menu: Displays TV menu .,/@...
Connections NOTE: When connecting a Connector Type Cables Device device via the YPbPr or Side AV input, you must use the Scart connection cables to enable Connection connection. See the illustrations (back) on the left side. You can use YPbPr to VGA cable to enable YPbPr signal via VGA input.
channels of it will be listed on the top of the Channel Switching On/Off List. When finished, press OK to continue. To Switch the TV On You can activate Store Mode option at this point. Connect the power cord to a power source such as a This option will configure your TV’s settings for store wall socket (220-240V AC, 50 Hz).
button to stop timeshift recording and return to the Note: When viewing image files the Media Browser menu can only display 1000 image files stored on the connected live broadcast. USB device. Timeshift cannot be used while in radio mode. Recording a Programme You cannot use the timeshift fast reverse feature before IMPORTANT: When using a new USB hard disk...
not meet the speed requirements. Try connecting that device from the source list. In that case volume another USB disk. control keys are directed to connected audio device. Note: ARC is supported only via the HDMI1 input. Media Browser Menu System Audio Control You can play photo, music, and movie files stored on a USB disk by connecting it to your TV.
TV Menu Contents System - Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode can be Mode set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen.
Page 13
System - Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Sets headphone volume. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
Page 14
Menu Timeout Changes timeout duration for menu screens. Software Upgrade Ensures that your TV has the latest firmware. Press OK to see the menu options. Application Version Displays current software version. This option is used to select which subtitle mode will be on the screen (DVB subtitle / Teletext Subtitle Mode subtitle) if both is available.
Child Lock: If this option is set to ON, the TV can only General TV Operation be controlled by the remote control. In this case the control buttons on the TV will not work. Using the Channel List Set PIN: Defines a new PIN number. The TV sorts all stored stations in the Channel List.
Event Details (Info button): Displays detailed will become colour-coded and can be selected by information about selected events. pressing the coloured buttons. Follow the instructions Filter (Text button): Views filtering options. displayed on the screen. Next Time Slice (Green button): Displays the events Software Upgrade of next time slice.
No sound PC Input Typical Display Modes • Check if the TV is muted. Press the Mute button or The following table is an illustration of some of the increase the volume to check. typical video display modes. Your TV may not support •...
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x400 þ 640x480 þ þ þ...
Page 20
20160315v1 OLE 20640H-DB Elmarc B.V. Kolenbranderstraat 28 2984 AT Ridderkerk The Netherlands...