Bosch GEX33-5 Operating/Safety Instructions Manual page 11

REMOVING AND INSTALLING
DUST CANISTER
To attach dust canister, push on the dust
port in the direction of the arrow (Fig. 5).
To remove dust canister, squeeze release
tabs on both sides of canister and simply
pull away from the tool (Fig. 6).
CLEANING AND EMPTYING THE
DUST CANISTER
It is recommended to loosen dust from the
microfilter by gently striking it against a
solid surface (Fig. 7).
To empty, lift lid of canister. Knock excess
dust out of the micro filter, or remove dust
with your fingers or a soft brush (Fig. 8).
You may notice that all the dust may not
come out of the canister. This will not affect
sanding performance but will reduce dust
collection efficiency.
NOTE: Do not wash the microfilter with
soap and water. Dust may become more
firmly lodged in the pores, which will reduce
dust collection, and damage the micro filter.
To ensure optimum dust extraction, empty
and clean the canister and microfilter
frequently.
Dust Collection
RELEASE
TABS
FIG. 7
FIG. 8
-11-
1
2
FIG. 6