Download Print this page

Channel Plus DA-506BID User Manual

Channel plus da-506bid: supplementary guide
Hide thumbs Also See for DA-506BID:

Advertisement

Quick Links

Warranty
Multiplex Technology, Inc. warrants this product to be free
from defects in materials and workmanship for a period of
one year from the date of purchase or MTI will repair, or at
its option, replace the defective product. To obtain
warranty service, call MTI for a return material
authorization (RMA) number and return the product
prepaid to Multiplex Technology, Inc., 3001 Enterprise
Street, Brea, CA 92821, Attention: Customer Service.
Please put the RMA number on the outside of the carton.
Any implied warranty arising from the sale of the product
including implied warranties of merchantability and fitness
for purpose are limited to the warranty stated above. MTI
shall not be responsible for losses or damages or
expenses, whether direct, consequential or incidental
arising from the use of or the inability to use this product.
Some states do not allow limitations on how long the
implied warranty lasts or the exclusion or limitation or
incidental or consequential damages, so the above
limitations and exclusions may not apply to you. This
warranty gives you specific legal rights, and you may have
other rights which may vary from state to state.
600-189 rev C
600-189 rev C
Your DA-506BID is supplied with
extra mounting ears. These allow
the DA-506BID to be mounted in
TM
any OpenHouse structured wire
grid system.
DA-506BID
r a n
le o
c a b
l fo r
a n e
a x p
6 c o
a l 1 x
t io n
ir e c
b i- d
v d c
+ 1 5
m A
3 0 0
r t
s h o
TM
TM
B ID
5 0 6
D A -
s
s t e m
a s y
t e n n
t
/ a n
c a t v
lo n g

Advertisement

loading

Summary of Contents for Channel Plus DA-506BID

  • Page 1 Your DA-506BID is supplied with extra mounting ears. These allow the DA-506BID to be mounted in any OpenHouse structured wire grid system. Warranty Multiplex Technology, Inc. warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase or MTI will repair, or at its option, replace the defective product.
  • Page 2: Troubleshooting Tips

    Causes of an over-driven amp: 1) Too much gain in the system. Use the variable attenuator to find a setting where the signals are not noisy, and the amp is not being over-driven. 2) Strong local FM signal. If you have a nearby FM transmitting tower, you may need to install an FM trap before the amplifier.