Connections; Connection To A Tv; Connection To An Audio System - Philips BDP3502 User Manual

4. CONNECTIONS

4.1.

Connection to a TV

C HDMI connection (Supports up to 4K(*1), 4K/24(*2) resolution.)
(*1) 4K: Outputs video data with a frame rate of 60 frames per second.
(*2) 4K/24: Outputs video data with a frame rate of 24 frames per second.
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable
(also known as HDMI category 2 cable) is recommended for better compatibility.
Niut
D
• If the TV receives no audio / video signal after properly connecting the unit and the TV with an HDMI cable, it
may be the TV. Please refer to the TV's user's manual.
• If the TV receives no audio signal after properly connecting the unit and the TV with an HDMI cable, make sure
the TV input is not an HDMI-DVI Input terminal.

4.2. Connection to an audio system

• When you change the connections, all devices should be turned off.
• When connecting the unit to an external audio system, refer to the User manual for setup / configuration help.
C HDMI audio connection
AV receiver / ampli er with
an HDMI input jack
EN
HDMI cable
(not included)
HDMI IN
HDMI cable
HDMI OUT
(not included)
Your TV
HDMI IN
HDMI cable
(not included)
HDMI IN
13
Your TV