Canon RealIS SX80 Mark II Supplementary Manual page 5

8. Sharpness
8.1 [Set Sharpness] Commands
Commands for setting the sharpness, or for acquiring the sharpness setting value.
Command Type
Sharpness
Setting value
Get sharpness
Example:
8.2 [Set Sharpness] Responses
Responses to commands for setting the sharpness, or for acquiring the sharpness setting value.
Response Type
Sharpness
Success
Failure
Get sharpness
Example:
9. Contrast
9.1 [Set Contrast] Commands
Commands for setting the contrast, or for acquiring the contrast setting value.
Command Type
Contrast
Setting value
Get contrast
Example:
9.2 [Set Contrast] Responses
Responses to commands for setting the contrast, or for acquiring the contrast setting value.
Response Type
Contrast
Success
Failure
Get contrast
Example:
ASCII Notation
SHARP=<number><CR> 53h 48h 41h 52h 50h 3Dh <character code> 0Dh
GET SHARP<CR> 47h 45h 54h 20h 53h 48h 41h 52h 50h 0Dh
SHARP=-4<CR> 53h 48h 41h 52h 50h 3Dh 2Dh 34h 0Dh
ASCII Notation
i:OK<CR> 69h 3Ah 4Fh 4Bh 0Dh
<Refer to the Error List>
g:SHARP=<number><CR> 67h 3Ah 53h 48h 41h 52h 50h 3Dh <character code> 0Dh
g:SHARP=-2<CR> 67h 3Ah 53h 48h 41h 52h 50h 3Dh 2Dh 32h 0Dh
ASCII Notation
CONT=<number><CR> 43h 4Fh 4Eh 54h 3Dh <character code> 0Dh
GET CONT<CR> 47h 45h 54h 20h 43h 4Fh 4Eh 54h 0Dh
CONT=-4<CR> 43h 4Fh 4Eh 54h 3Dh 2Dh 34h 0Dh
ASCII Notation
i:OK<CR> 69h 3Ah 4Fh 4Bh 0Dh
<Refer to the Error List>
g:CONT=<number><CR> 67h 3Ah 43h 4Fh 4Eh 54h 3Dh <character code> 0Dh
g:CONT=-2<CR> 67h 3Ah 43h 4Fh 4Eh 54h 3Dh 2Dh 32h 0Dh
PC⇒PRJ
Binary Notation
PRJ⇒PC
Binary Notation
PC⇒PRJ
Binary Notation
PRJ⇒PC
Binary Notation