Advertisement
Vertex Series III
IC-VJ63-W
IC-VJ63-W Vertex Series III - 6" In-Ceiling Speaker
IW-D61-W Debut Series 6.5" In-Wall Speaker
IC-VJT63-W Vertex Series III - 6" In-Celing Angled Home Theater Speaker
IC-D61-W Debut Series 6.5" In-Ceiling Speaker
IW-DC51-W Debut Series Dual 5.25" In-Wall Center Speaker
IW-VJ63-W Vertex Series III - 6" In-Wall Speaker
IC-DT-61-W Debut Series 6.5" Home Theater In-Ceiling Speaker
IC-VJT63-W
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
IW-VJ63-W
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ELAC Vertex III IC-VJ63-W Series
Summary of Contents for ELAC Vertex III IC-VJ63-W Series
- Page 1 Vertex Series III IC-VJ63-W IC-VJT63-W IW-VJ63-W OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS IC-VJ63-W Vertex Series III - 6” In-Ceiling Speaker IW-D61-W Debut Series 6.5” In-Wall Speaker IC-VJT63-W Vertex Series III - 6” In-Celing Angled Home Theater Speaker IC-D61-W Debut Series 6.5” In-Ceiling Speaker IW-DC51-W Debut Series Dual 5.25”...
- Page 2 INTRODUCTION Congratulations on your purchase of these fine loudspeakers and welcome to the ELAC family. Ever since we started in 1926, we have striven to create the very best products available. Our passionate team members are always looking for ways to improve your listening enjoyment. We thank you for making this choice.
- Page 3 SAFETY INSTRUCTIONS Use Only As Directed • Observe all warnings on the speaker and in this manual. • Please check the speaker for damage before use. • Carefully consider the proper location before beginning the installation. • Observe the correct polarity when connecting these speakers, according to the instructions in this manual.
- Page 4 When connecting the speaker wires it is important to retain the correct polarity. Be sure that the wire attached to the “+”, red, positive, or hot terminal on your ELAC speaker connects to the “+”, red, positive, or hot terminal on the other component.
- Page 5 INSTALLATION - continued • Attach the speaker cables to the speaker terminals, observing the correct polarity. • Remove the grille from the speaker frame. The grille is held on by magnetic attraction. • With the grille removed, the speaker can be inserted into the mounting hole. First make sure all the tabs are rotated inwards and then connect the speaker wires.
- Page 6 SPECIFICATIONS IC-VJ63-W IC-VJT63-W IW-VJ63-W Speaker type 2-way, rear side open 2-way, rear side open 2-way, rear side open Tweeter Jet Folded Ribbon Jet Folded Ribbon Jet Folded Ribbon Woofer 6 inch (152 mm) Crystal 6 inch (152 mm) Crystal Alu- 6 inch (152 mm) Crystal Aluminum Cone minum Cone...
- Page 7 Passive Speakers (No Built-in Amplifier) ELAC Americas Inc. Warrants to the original purchaser that this product will be free from defects and or workmanship for a period of 3 (three) years from the original date of purchase. During this time, repair or replacement of parts will be free of charge to the original owner.
Need help?
Do you have a question about the Vertex III IC-VJ63-W Series and is the answer not in the manual?
Questions and answers