Page 2
1. Description WLU6111-D69 is an 802.11b/g/n module; the product is put into the printer to connect with Wireless AP Router and user, while any user need to be printing any documents through wireless, WLU6111-D69 is better choice for use. The WLU6111 is intended to be installed by a system integrator, not the end-user.
Page 4
3. Setup Operation Please setup WLU6111-D69 into the printer, connect power cable from printer to power jack of WLU6111-D69; power on the printer when you make sure WLU6111-D69 can be supplier from printer, then you can see below setup window: Install WLU6111-D69 into the system.
Page 5
C. Press “Install from a list or specific location (Advanced)” as below window: D. Press “Continue Anyway” as below window:...
Page 6
Press “Finish”, then you can connect with other wireless device through the Wireless Module.
Page 7
Any other installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by ASKEY could void your authority to operate the equipment. . • The devices must not be co-located or operating in conjunction with any other antenna...
Page 8
Canada. Industry Canada (IC) This device complies with RSS210 of Industry Canada. CAUTION: Exposure to Radio Frequency Radiation. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population.
Need help?
Do you have a question about the WLU6111-D69 and is the answer not in the manual?
Questions and answers