Page 1
802.11 b/g/n 2.4G Band 1T1R AP Module WLL6540(RoHS) OEM Manual...
Page 2
802.11 b/g/n 2.4G Band 1T1R AP Module WLL6540(RoHS) Product (module) photo Module dimensions Antenna info Part number: 2108517-1 Antenna type: stamped metal antenna Max Peak gain: 2.4 dBi...
Page 3
Install application on IOT (Internet of Thing) device (eg. smartphone or notebook program) Power up processor unit (WLL6540(RoHS) power source). Scan for Wi-Fi network SSID (WLL6540(RoHS) as default SSID), connect to SSID, and input password. (End-user can change SSID/Password from the application program) ...
Page 6
USA - Federal Communications Commission (FCC) FCC Radiation Exposure Statement Interference Statement These devices comply with Part 15 of the FCC Rules. Operation of the devices is subject to the following two conditions: (1) The devices may not cause harmful interference, and (2) The devices must accept any interference that might cause undesired operation.
20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: H8N-WLL6540”. The grantee's FCC ID can be used only when all FCC compliance requirements are met.
This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided in this manual The antenna circuit and layout must follow “WLL6540(RoHS) OEM board design guide” to design their own antenna circuit.
Page 9
The final end product must be labeled in a visible area with the following: “Contains transmitter module IC: 1353A-WLL6540”. Contient le module d'émission IC: 1353A-WLL6540 This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the WLL6540 and is the answer not in the manual?
Questions and answers