Consult the dealer or an experienced radio/TV technician for help. Warning: If a shielded-type power cord is supplied with this monitor, it is required in order to meet FCC emission limits and to prevent interference with nearby radio and television reception. Only shielded cables should be used to connect I/O devices to this equipment.
Do not defeat the safety purpose of the grounding-model plug. Choose a Tandem Blade attachment plug configuration power cord for 230V AC input. VL510 User’s Manual...
Page 5
11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. VL510 User’s Manual...
Page 6
E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance, indicating a need for service. Notice : Actual safety specifications please refer to the label on the back of monitor. VL510 User’s Manual...
Recommendation for Optimum Performance hen setting up and using the monitor, pay special attention to the following for optimum performance: Do not use your monitor against a bright background or where sunlight or other light sources will shine directly on the screen.
CRT to display crisp text and vivid color graphics. The full-function digital control and On-Screen Display (OSD) system provides easy adjustment of image geometry and color settings for different display modes with the precision of a fixed frequency monitor.
Installation Unpacking he following lists all of the items included in the monitor package box. Please save the original box and packing materials for future transportation or shipment of the monitor.color monitor package should contain the following items: System Setup Turn off the system and all attached peripherals.
Page 10
Remove the Tilt/Swivel Base 1. Squeeze and hold the latches. 2. Pull the tilt/swivel base to the rear of the monitor and lift to remove the base. Installing the Tilt/Swivel Base Align the base with the slots on the bottom of the monitor and insert the tilt/swivel base into the slots.
Please save the original box and its packing materials for futuretransportation or shipment of the monitor. Connecting the Monitor Turn off the computer. Connect the monitor's signal cable to the graphic card. Plug in the monitors power cord. Turn on the computer, and the monitor VL510 User’s Manual...
Front Panel Controls 1. POWER SWITCH 2. POWER INDICATOR As long as the monitor is powered, this indicator is lit. In normal operation, it lights green. While in power saving mode, the indicator will turn to amber. 3. CONTROL SWITCHES Used to alter the selected function, or, the brightness or contrast directly.
Page 13
ENERGY STAR low power state definition. Every time when you first turn on your PC and monitor ,the power save function remains inactive, the function will then be triggered when the input signal from the PC is cut off by the computer itself, or through some other loss of signal input afterwards.
Page 14
Press " ", " " button to adjust the trapezoid distortion of the picture (4) When the fourth LED indicator is lighted Press " ", " " button to adjust the parallelogram distortion of the picture. VL510 User’s Manual...
Items to check Check the color of the power LED indicator; if it is orange, then the monitor is in a power saving mode. Check if the horizontal/vertical frequency are out of range. Maximize the Brightness and Contrast controls.
Page 16
Verify that the host system is Plug & Play compatible. functionality Check to see if Windows is installed, and the software key for the Data Display Channel (DDC) function is enabled. Determine if original manufacturer's detachable signal cable is being used (D-Sub-15 pin only). VL510 User’s Manual...
Energy Declaration his monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which also supports the VESA DPMS standard to fulfill the requirements of the NUTEK specification 803299/94/96.
200V to 240V, 50/60Hz (Automatic) DDC 1 / DDC 2B 359 (W) x 355.5 (H) x 391.2 (D)mm 11.7 Kgs Operating Temperature 5°C to 35°C Humidity 20% to 80%(Non condensing) Storage Temperature -20°C to 60°C Humidity 10% to 90%(Non condensing) VL510 User’s Manual...
Reference Information his color monitor supports multiple operating platforms such as IBM compatible and Macintosh family computers. This section provides you with detailed information on pin assignment of the D-Sub connector and the preset timing chart of the prevailing video standards.
Preset Timing Chart Note: This monitor is equipped with a microprocessor which allows the user to set his own preferred mode(s) beyond those standard mode listed below. o reduce visual tiredness and eyestrain, it is recommended to choose the highest refresh modes available.
Need help?
Do you have a question about the VL510 and is the answer not in the manual?
Questions and answers