Bushnell Yardage Pro XGC Quick Start Manual

Bushnell yardage pro xgc: quick start

Hide thumbs Also See for Yardage Pro XGC:

See also: User Manual

Quick Start Guide

Install Software

1. Insert CD included with your product into computer.

2. Open the appropriate CD drive to view disk contents.

3. Select "Yardage Pro Sync Installer" to start the install.

4. Select "Sync Application" to install sync software.

5. Launch software from "Yardage Pro Sync" application

icon on desktop.

Note: Software updates available at: http://www.bushnellgolf.com/gps/yardage_xgc.cfm

Connect Cable

1. Connect provided cable to available USB port on

computer.

2. Insert other end of cable into mini USB port on

device.

3. Hold power button for approximately 2 seconds.

4. "USB Mode" message will appear on the device when

ready to accept data.

Download GPS Data

1. Launch Bushnell XGC Sync application, from "Welcome"

tab select "Join Now" button to become an iGolf member. If

already a member, select the "Member Login" button.

2. Once logged in to iGolf.com, select the "GPS Download"

tab located at the top of the Sync application to search for

the desired golf course.

3. Select course name from search results, download and

save GPS file.

Note: Once successfully downloaded, the course will appear in the

"My Courses" section in the left column of the sync application.

Page 1 4. “USB Mode” message will appear on the device when ready to accept data. Download GPS Data 1. Launch Bushnell XGC Sync application, from “Welcome” tab select “Join Now” button to become an iGolf member. If already a member, select the “Member Login” button.
Page 2: Sync Gps Data
Satellite strength may be diminished due to obstructions or cellular signals. If you require further assistance, please review the support resources available online at: http://www.bushnellgolf.com/gps/yardage_xgc_support.cfm. Otherwise, refer to the Owner’s Manual for detailed information on using the Bushnell Yardage Pro XGC.