hajdu Z30 SMART Manual page 21

• The current of the electric system has to be connected to the
container through a two­pole switch (disconnecting all poles)
ensuring full disconnection in an environment of overvolt-
age category III. (At least 3 mm distance must be ensured be-
tween open poles.) The first heating cycle must be supervised
by a professional.
• The electrical safety cover may not be removed, but by a pro-
fessional; failure to observe this, may lead to electrical shock
or other dangers. To ensure safe operation it is recommend-
ed to regularly (every year) have the appliance and the com-
bined safety valve checked by a plumber for proper opera-
tion. Additionally, it is also recomended to blow off the valve
every two months by turning the blowoff button of the safety
valve in direction indicated by the arrow. This way, the valve
seat will be cleaned of any possible deposit (scale, sand grains
etc.).
• If the mains cable damaged, it must be replaced in order to
avoidany danger. Such replacement must be performed by
the manufacturer, its service support or a similarly qualified
professional.
SERVICE
For regular servicing of appliances or in the event of a fault, please contact one of our
contracted service agents listed in the service notes. If you are not satisfi ed with the
repair carried out by the service agent, please contact the HAJDU Hajdúsági Ipari Zrt.
customer service desk.
Customer service contact details:
Tel.: +36 52 582­787
E­mail: vevoszolgalat@hajdurt.hu
ENVIRONMENTAL PROTECTION PRECAUTIONS
Please note that at the end of the lifecycle of the product you have purchased, its
characteristics have the potential to harm the environment, primarily the soil and
groundwater, since it contains components (for example, cables) that mean at the
end of its life it is classifi ed as hazardous waste.
At the end of its lifecycle, please do not place the appliance in general household
waste. It should be deposited with a company engaged in collecting waste electrical
appliances or returned to the manufacturer so that through the professional ma-
nagement and recycling of the waste product, together we can help protect the
environment.
EN
3 2 1