Advertisement
Digital Receiver Setup Guide
DCX 525E / 700 / 3400
TIP! Write down the Serial Number for your receiver for reference:
The Serial Number is a 12 digit number located on the back or bottom of your receiver or on
your receipt starting with "M".
Install Kit Includes
1
4
5
Before You Begin
1.
Place the receiver where it can be easily plugged in, detected by the remote
and connected to the TV.
2. Have your Serial Number for the receiver handy to activate your receiver.
The Serial Number is a 12 digit number located on the back or bottom of the
receiver or on your receipt starting with "M".
3. Follow the steps on the next page to connect and activate your receiver.
2
6
1. Digital Receiver Setup Guide
2. HDMI Cable
3. Audio + Video Cables
3
4. Power Cord
5. AA Batteries
6. Remote
7. DCX 525E / 700 / 3400 Receiver
7
Advertisement
Table of Contents
Related Manuals for EastLink DCX 525E
Summary of Contents for EastLink DCX 525E
- Page 1 3. Audio + Video Cables 4. Power Cord 5. AA Batteries 6. Remote 7. DCX 525E / 700 / 3400 Receiver Before You Begin Place the receiver where it can be easily plugged in, detected by the remote and connected to the TV.
- Page 2 Connecting Your Receiver to Your TV Locate the coax cable going from the cable wall outlet to your TV (or other device). Disconnect the coax cable from your TV (or other device). Take the coax cable that you disconnected from your TV (or other device) and connect it to the CABLE-IN port on your new receiver.
- Page 3 One of the most common reasons customers are unable to watch their favourite show, is that their TV is set to the wrong “Input” which prevents the Eastlink signal from coming through. Press the button labeled Input on your TV’s remote. Depending on the brand of your TV, this button may alternatively be labeled Source, A/V or Video.
Need help?
Do you have a question about the DCX 525E and is the answer not in the manual?
Questions and answers