LG CineBeam PF1000UG Owner's Manual page 74

74
Menu
Color
Temperature
Color
Management
System
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
In Expert mode, you can customize the options of
each mode.
Gamma: Select 1.9, 2.2,or 2.4.
a. Method: 2 Points
- Pattern: Inner, Outer
- Points: Low, High
- Red/Green/Blue: The adjustment range for
each color is from -50 to +50.
- Apply to all inputs: The values of the Color
Temperature is applied to all the input modes.
b. Method: 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit
indicating the size of a video signal and can
be set to 5,10,15, ... 100. You can fine-tune for
each setting as shown below.
- Luminance: The adjustment range is 50 to
500.
- Red/Green/Blue: The adjustment range is -50
to +50.
- Apply to all inputs: The values of the Color
Temperature is applied to all the input modes.
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow
colors. Allows an expert to adjust the tint using a test
pattern. Six colors (Red/Green/Blue/Cyan/Magenta/
Yellow) can be selectively adjusted without affecting
other colors. You may not see colors change on a
normal picture even after adjustment.
- Saturation Red/Green/Blue/Cyan/Magenta/
Yellow,
Tint Red/Green/Blue/Cyan/Magenta/Yellow,
Luminance Red/Green/Blue/Cyan/Magenta/
Yellow:
The adjustment range is -30 to +30 each.
Description