Audio Operations; Audio Button - Boss Audio Systems CD-3190R User Manual

8. AUDIO OPERATIONS

10)ENCODER VOLUME BUTTON
To increase the volume, rotate the volume control clockwise. T o decrease the volume, rotate the
volume control counter clockwise. When volume is adjusted, the volume level will be shown on
the display panel as a number ranging from 0 (lowest) to 46 (highest).

5) AUDIO BUTTON

Press this button to select desired audio function.
ORDER OF FUNCTION:
VOLUME(VOL) -> BASS(BAS) -> TREBLE(TRE) ->BALANCE(BAL) ->FADER(FAD)
While the selected function is displayed, press volume UP/DN buttons to adjust the level within 5
seconds, otherwise the unit will return to volume adjustment mode.
2) MUTE BUTTON (MUTE)
Press this button to mute the sound. Press it again to resume listening.
17) PRESET EQUALIZER BUTTON (EQ)
Press this button to toggle the following EQ settings:
FLAT->CLASSICS->POP M->ROCK M->DSP OFF
At DSP OFF mode, EQ will be controlled by Bass/Treble setting.
13) BAND/LOUDNESS BUTTON (BAND/LOUD)
Press the Band/Loudness Button for couple of seconds to switch the loudness on or off. When Loudness is
on, display will show 'Loud On' for a few seconds.
E - 9