Am Antenna Connection; Cable Radio As An Option; Connecting Your Tv To The System; Selecting The Proper Tv Video Input Is Critical - Bose Lifestyle 18 Series II Installation Manual

B S C
ASIC YSTEM ONNECTIONS

Connecting your TV to the system

16

AM antenna connection

1. Plug the connector on the AM antenna lead into the AM antenna jack.
2. Stand the loop antenna on the base or mount the antenna on a wall, following the
instructions enclosed with the AM antenna.
3. Move the AM loop antenna as far as possible (at least 20 inches or 50 centimeters) from
the media center, and at least 2 feet (60 centimeters) from the Acoustimass
When all connections are completed and you can turn on your system, you may need to
experiment with the orientation of the loop antenna for optimum AM reception.
Note: AM reception can be adversely affected by a nearby television, when it is on. Turn off the
TV for best AM reception.

Cable radio as an option

Some cable TV providers make FM radio signals available through the cable service to your
home. This cable connects to the FM antenna jack on the back panel of the media center.
For instructions on how to make this connection, contact your cable TV provider.
Note: Make sure your cable radio installation includes a signal splitter to prevent the cable TV
band from entering the media center. For details, contact a qualified installer.
These instructions will enable you to connect the media center to your TV (in the most basic
manner). This allows you to then verify that the system operates correctly and to begin enjoy-
ing its various features right away.
Note: For other options, refer to "Higher-quality connections to consider" on page 27.
Or, for online assistance with your video connections, please visit our website:
owners.bose.com.

Selecting the proper TV Video input is critical

After you make video and audio connections to the TV, there is one important step to ensure
that you can see the video coming from the media center:
• To view DVDs and LIFESTYLE
Video input that connects to the media center.
To get to the proper Video input, use your TV remote control for the steps below:
1. Press the TV input button, which may be labeled TV/Video, Source, or Input.
2. Press it more than once, as needed, depending on which of multiple TV Video input
jacks you connected to the media center. Refer to your TV owner's guide for more
details.
Jot it here: My LIFESTYLE
Note: For information on how to set the LIFESTYLE
Operating Guide.
Français
®
system menu images on your TV, you must select the TV
® Media center connects to TV Video input #________
® remote to control the TV, refer to your
Español English
® module.