Icom M400BB SW Instruction Manual page 13

After making the individual DSC call, the transponder will
r
display "DSC Transmission COMPLETED."
• Push [CLEAR] to return to the screen displayed before you en-
tered the voice channel selection screen in step w.
• The transceiver stands by on Channel 70 until an acknowledge-
ment is received.
Transponder's display
Step 2: Transceiver's operation
When the acknowledgement is received, beeps sound.
t
If the acknowledgement
➥
push [ALARM OFF] to stop the beeps, and then select
the intership channel specified in step w.
• A different intership channel will be selected if the station you
called cannot use the channel.
• To reply, push [PTT] and speak at a normal voice level.
• You can check the MMSI code or the name, if programmed,
of the AIS target on the display.
If the acknowledgement
➥
push [ALARM OFF] to stop the beeps, and then return
to the operating channel before you entered the MENU
screen.
Microphone's display
'Able to comply' is received,
'Unable to comply' is received,
AIS TRANSPONDER
'Able to comply' is received
' Unable to comply' is received
y After the communication is finished, push [EXIT] to return
to the normal operating mode.
TRANSPONDER
3
1
2
3
4
5
6
7
8
9
10
11
12
13
[Y]
14
[Z]
15
[CLEAR]
16
[DSC]
5