Table of Contents
Advertisement
6
Troubleshooting
General
Symptoms
The Power does not
turned on.
The unit does not start
playback.
The angle cannot be
changed.
Cannot play movie, photo
or audio files.
The remote control does
not work properly.
Cause & Solution
• Plug the power cord into the wall outlet securely.
• Insert a playable disc. (Check the disc type, color system, and
regional code.)
• Place the disc with the playback side down.
• Place the disc on the disc tray correctly inside the guide.
• Clean the disc.
• Cancel the Rating function or change the rating level.
• Multi-angles are not recorded on the DVD Video being
played.
• The files are not recorded in a format that the unit can play.
• The unit does not support the codec of the movie file.
• The remote control is not pointed at the remote sensor of
the unit.
• The remote control is too far from the unit.
• There is an obstacle in the path between the remote control
and the unit.
• The batteries in the remote control are exhausted.
Maintenance
89
5
Advertisement
Table of Contents
