Table of Contents
Advertisement
4. Connect the audio cable.
Connect the audio cable between the socket on the rear of
the monitor and your computer audio outlet.
Optional: Connect an earphone into the earphone
jack located on the underside of the control panel as
shown.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Picture may differ from product supplied for your
region.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
install the monitor software.
10
How to install your monitor hardware
to
Advertisement
Table of Contents
