Vinotemp element EL-40WCST Owner's Manual page 11

The controls of your wine cooler
① Up
Used to raise (warm) the set temperature by 1°C or 1°F.
② Temperature Display
③°C/°F Display
④ Down
Used to lower (cool) the set temperature by 1°C or 1°F.
⑤ Set Temperature
Press this button, press UP/DOWN mark to set temperature. To view the "set" temperature
at any time, touch the UP or DOWN mark, the "set" temperature will temporarily "flash" in
the LED display for 5 seconds.
⑥ °C/°F Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
⑦ Power
To control the appliance, turn on/off. To turn off the appliance, touch the
least 5 seconds. Press
temperature set previously when restart the appliance or reconnect after power cuts.
SETTING THE TEMPERATURE CONTROL
You can select temperature display setting from Fahrenheit to Celsius degree by touching the °C/°F
Selector mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature
display window. You can set the temperature as you desire by touching the UP and DOWN marks.
When you touch the two marks for the first time, the LED readout will show the original temperature
set previously.
l
The temperature that you desire to set will increase 1°C or 1°F if you touch the UP mark once,
on the contrary the temperature will decrease 1°C or 1°F if you touch the DOWN mark once.
l Temperature range: 5- 18 °C /41-65 °F
l
The temperature inside the unit will be appeared in blue color in the display window.
again, turn on the appliance. The LED readout will show the original
mark and hold for at
11