Samsung WA54M8750AV User Manual page 62

Troubleshooting
No Code
11
12
13
14
15
16
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
62 English
WA8700M_WA54M8750A_DC68-03774B-02_EN.indd 62
Check the drain hose.
• Make sure the end of the drain hose is positioned correctly.
• Make sure the drain hose is not clogged.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
LC
a Samsung customer service center.
NOTE
When the washer displays "LC", the washer do draining for 3
minutes. During this time, the POWER button is inoperative.
Water overflowed.
Restart after spinning.
•
OC Turn off the washer, unplug it, wait one minute, and then plug
•
the washer in again. If the information code remains, contact
a Samsung customer service center.
When position of the clutch can't be detected.
• Turn off the washer, unplug it, wait one minute, and then plug
PC
the washer in again. If the information code remains, contact
a Samsung customer service center.
After position of the clutch is detected, if the signal from the hall
clutch hall is incorrect.
PC1 • Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
Ub Redistribute the load. If only one item of clothing needs
•
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "Ub" check message
will appear in the display.
Display for additional rinsing.
• Show additional rinsing in sensing unbalance.
Ur
• Method of releasing the display.
• Any key input.
Meaning
2017-04-18 9:59:53