Setting Up Programmed Operations - Toshiba TCB-EXS21TLE Instruction Manual

Setting Up Programmed Operations

Correctly set the present time and today's day of the week.
Unless both are correctly set, the programs will not run as expected.
• Up to 3 programmed operations can be set per day for day of the week.
• To change the settings of an existing program, use the same below
procedure used to set up a new program.
STEP 1 Press the PROGRAM button
• When the PROGRAM button is pressed, today's day
of the week start blinking and the present time
indication changes to a blinking "PG-1".
STEP 2 Press the DAY button and select a day of the week for
programmed operation.
• When the SET button is pressed, the program
schedule marker (
lighting and, at the same time, the time set in program
starts blinking. Also, the present time indication
changes to a blinking "PG-2".
NOTE
• The currently selected day of the week blinks slowly at
this time.
8
) changes from blinking to
Example settings
OI-916-8-EG