Network Bridge Function; Connecting Devices - Dukane 8232 User Manual

7. Network Bridge Function

7. Network Bridge Function
This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
By making use of the NETWORK BRIDGE function, a computer connected to the
projector via wireless or wired LAN is able to control an external device via RS-
232C communication using the projector as a network terminal.
Computer

7.1 Connecting devices

1) Connect the projector's LAN port to the computer's LAN port with a LAN cable,
or insert the USB wireless adapter into the USB TYPE A port.
2) Connect the projector's CONTROL port and the device's RS-232C port with an
RS-232C cable, for RS-232C communication.
NOTE
• Before connecting the devices, read the manuals for the devices to
ensure the connection. For RS-232C connection, check the specifications of
each port and use the suitable cable. (&Connection to the ports in the Operating
Guide - Technical)
86
TCP/IP data
Wired LAN
LAN cable
Wireless
LAN
USB TYPE A port
LAN port
CONTROL port
Protocol change
RS-232C cable
Serial data
RS-232C
External device